Material for BD15 bass enclosure... Bert (Off Topic)

by Bert , Thursday, January 19, 2006, 09:01 (6666 days ago) @ BobW

Hi Bob,

I am planning to use a sandwich of 3/4 + 1/2 inch Baltic Birch plywood to
get to the specified 32mm which is just not an option here in America. A
vacuum press would be used to make the sandwich and at 1500 lbs/sq. ft.
that ought to do the job. I am NOT a fan of particle board.

The suggested wall thickness is needed for the suggested particle board. If you use other materials then things in the design change. If you would like to use different material then the only importance is the internal volume and the port dimensions which should be the same as on the drawings.

For the rest I do not know the real effect caused by the other materials used.

Ciao,

Bert

--
BD-Design - Only the Best!

Tags:
0

locked

4034 views

Complete thread:

RSS Feed of thread

Material for BD15 bass enclosure... Bert - BobW, 2006-01-18, 22:52
- Material for BD15 bass enclosure... Bert - Bert, 2006-01-19, 09:01
  - Material for BD15 bass enclosure... Bert - BobW, 2006-01-19, 13:32
    - Material for BD15 bass enclosure... Bert - GC, 2006-01-19, 14:59
    - Material for BD15 bass enclosure... Bert - Bert, 2006-01-19, 15:09
      - "Particle bd' or MDF - BobW, 2006-01-19, 20:25
        "Particle bd' or MDF - Bert, 2006-01-19, 23:30
        "Particle bd' or MDF - GC, 2006-01-20, 06:29
        
        "Particle bd' or MDF - rodneyAB, 2006-01-20, 10:06
        "Particle bd' or MDF - BobW, 2006-01-20, 15:53