Experimenting with damping material (Singular)

by Bert , Monday, July 02, 2007, 09:58 (6137 days ago) @ MikeH

Hi Mike,

Thanks for the update, tough job! :wink:

I neeed to play with the filter to get the tweeter right next. I find them
too "bright". I'll try adding an inductor to roll them off more steeply at
12dB/octave at about 10kHz.

Try to add a resistor in parallel with the tweeter (around 22 ohms) to dampen it a bit, should make it less "present". Instead of 12dB you could also use a smaller capacitor (470nF) to tune the high frequencies so that the overlap remains a bit wide for freshness. This by itself willreduce the output at its lower frequencies.

Bert

--
BD-Design - Only the Best!

Tags:
0