AER BD3 replacing Fostex 206e (Oris Horns)

by Bert , Friday, February 22, 2008, 20:51 (5901 days ago) @ GC

....are the AER BD3 are identical to the AER MD3 ?....

Yes, they are identical. Congratulations!

Those are the second generation phase plugs used with the Crowns. The idea is to screw the Bronze plugs in place (3,5mm threads should be present) and place the Crown at the most top of the plug with the "fingers" towards the driver.

Also, do not tighten the driver too strong to the horns, just fixed in place is sufficient and beware of the magnet strength (it will like your screwdriver a lot!)

Bert

--
BD-Design - Only the Best!

Tags:
0