Please help to solve the problem (BD-Design)

by Bert @, Tuesday, May 08, 2012, 09:02 (4343 days ago) @ drquangle

My horns (with AER BD1) are working OK if I connect direct CD player --> preamp -->300B monoblocks -->horns. Whenever I set up CD Player -->preamp -->active crossover (Pioneer D23) -->300b monoblocks --> horns, there is a problem on one side of horn after 1/2 hour listening OK (the horn was silent after working awhile) . Do you think the crossover have a problem? wrong setup? or non match components?

Best way to find out is to isolate the problem first. First step could be to switch the channels one by one until the problem moves to the other side. This should tell you which part is causing the problem...

I would love to help but at this moment I am in the dark because it could be anything...

If things works OK for half an hour and then something stops working then something is overheated or getting warm making a bad contact act broken?

Do you have any article How can I set up the passive crossover? I have a pair of filter from BD, too. Thank you so much for your help.

What filter do you have from BD. Do you have a picture?

Bert

--
BD-Design - Only the Best!


Complete thread:

 RSS Feed of thread