DIY Orelo (Orelo/Orelino)
thanks bert, just two more questions - what do you reckon to be an efficiency of the halved system (2x15" per side) as well as a -3 point in the bass without added EQ?
About 112dB max (250Hz) with the -3dB corner at 120Hz or so? The roll off is relatively steep (dipole cancelation plus low Q driver).
Hard to put things in numbers (if possible!) as the room will have a major influence and the double effect of the used principle as well...
Better think that for your room you will have plenty of deep bass with half the Orelo. I have way more than enough for my room twice as big as yours with 4x BD15...
Bert
--
BD-Design - Only the Best!
Complete thread:
- DIY Orelo - BS, 2012-11-05, 11:26
- DIY Orelo - Bert, 2012-11-05, 19:52
- I like the look of the "half" Orelo in your pic... - samoore, 2012-11-12, 19:24
- It works well too... - Bert, 2012-11-12, 19:49
- It works well too... - Gasper, 2012-11-12, 20:59
- It works well too... - Bert, 2012-11-13, 00:14
- It works well too... - Gasper, 2012-11-12, 20:59
- It works well too... - Bert, 2012-11-12, 19:49
- DIY Orelo - anubisgrau, 2012-11-14, 09:44
- DIY Orelo - Rudy81, 2013-03-22, 07:26
- I like the look of the "half" Orelo in your pic... - samoore, 2012-11-12, 19:24
- DIY Orelo - DeMarko, 2013-01-09, 01:29
- DIY Orelo - Atilsley, 2013-01-21, 07:18
- DIY Orelo - Bert, 2013-01-22, 10:24
- DIY Orelo - Atilsley, 2013-01-22, 21:08
- DIY Orelo - Bert, 2013-01-22, 21:23
- DIY Orelo - Atilsley, 2013-01-23, 02:46
- 360mm to be exact... (nt) - Bert, 2013-01-23, 14:15
- 360mm to be exact... - Atilsley, 2013-01-28, 10:36
- 360mm to be exact... - Bert, 2013-01-28, 21:29
- 360mm to be exact... - Atilsley, 2013-01-31, 12:54
- 360mm to be exact... - Atilsley, 2013-02-02, 00:32
- 360mm to be exact... - Bert, 2013-02-02, 20:24
- 360mm to be exact... - Bert, 2013-02-02, 20:23
- 360mm to be exact... - Atilsley, 2013-02-02, 00:32
- 360mm to be exact... - Atilsley, 2013-01-31, 12:54
- 360mm to be exact... - Bert, 2013-01-28, 21:29
- 360mm to be exact... - Atilsley, 2013-01-28, 10:36
- 360mm to be exact... (nt) - Bert, 2013-01-23, 14:15
- DIY Orelo - Atilsley, 2013-01-23, 02:46
- DIY Orelo - Bert, 2013-01-22, 21:23
- DIY Orelo - Atilsley, 2013-01-22, 21:08
- DIY Orelo - Atilsley, 2013-02-11, 11:21
- DIY Orelo - Bert, 2013-01-22, 10:24
- DIY Orelo - Bert, 2012-11-05, 19:52