Problem with AER-MD3 (BD-Design)
Hi Bert,
One of the AER-MD3 drivers I bought from you about ten years ago to use in my Ortis 150 horns has developed a serious problem. After eliminating other possibilities and listening carefully I am pretty sure the problem is a misaligned scrubbing voice coil or perhaps some foreign matter in the gap.
An obvious solution is to ship the driver back to AER for repairs, but I am hoping you can suggest a more simple plan that doesn't involve intercontinental shipping. Any and all suggestions you might be able to offer to me will be very much appreciated.
Complete thread:
- Problem with AER-MD3 - Don Reid, 2015-10-31, 17:11
- Problem with AER-MD3 - Bert, 2015-10-31, 18:36
- Problem with AER-MD3 - Don Reid, 2015-11-01, 01:51
- Problem with AER-MD3 - Bert, 2015-11-02, 12:02
- Problem with AER-MD3 - Don Reid, 2015-11-02, 19:17
- Problem with AER-MD3 - Bert, 2015-11-02, 20:17
- Problem with AER-MD3 - Don Reid, 2015-11-04, 01:47
- Problem with AER-MD3 - alwsjr, 2015-11-12, 15:10
- Problem with AER-MD3 - Don Reid, 2015-11-15, 23:59
- Problem with AER-MD3 - Bert, 2015-11-16, 20:32
- Problem with AER-MD3 - ThomasT, 2016-01-29, 18:38
- Problem with AER-MD3 - Bert, 2016-01-29, 19:06
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:47
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:50
- Problem with AER-MD3 - Bert, 2016-01-29, 20:29
- Problem with AER-MD3 - ThomasT, 2016-01-30, 07:30
- Problem with AER-MD3 - Bert, 2016-01-29, 20:29
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:50
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:47
- Problem with AER-MD3 - Bert, 2016-01-29, 19:06
- Problem with AER-MD3 - ThomasT, 2016-01-29, 18:38
- Problem with AER-MD3 - Bert, 2015-11-16, 20:32
- Problem with AER-MD3 - Don Reid, 2015-11-15, 23:59
- Problem with AER-MD3 - alwsjr, 2015-11-12, 15:10
- Problem with AER-MD3 - Don Reid, 2015-11-04, 01:47
- Problem with AER-MD3 - Bert, 2015-11-02, 20:17
- Problem with AER-MD3 - Don Reid, 2015-11-02, 19:17
- Problem with AER-MD3 - Bert, 2015-11-02, 12:02
- Problem with AER-MD3 - Don Reid, 2015-11-01, 01:51
- Problem with AER-MD3 - Bert, 2015-10-31, 18:36