- amps - Nico, 2016-02-13, 08:41
- Hello all - Nico, 2016-02-12, 10:36
- Hello all - Gasper, 2016-02-12, 13:07
- Hello all - Nico, 2016-02-12, 18:35
- Hello Nico... - Bert, 2016-02-12, 21:25
- Hello Nico... - Nico, 2016-02-12, 22:26
- Hello Nico... - Don Reid, 2016-02-17, 01:23
- Hello Nico... - Nico, 2016-02-17, 07:28
- Hello Nico... - Don Reid, 2016-02-17, 01:23
- Hello Nico... - Nico, 2016-02-12, 22:26
- Hello all - Gasper, 2016-02-12, 13:07
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-17, 19:12
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-17, 20:00
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-18, 00:16
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-18, 09:32
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-23, 17:48
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-23, 20:47
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 10:11
- BD15 vs Altec 416A (8ohm) - robert, 2015-12-27, 11:20
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 11:24
- BD15 vs Altec 416A (8ohm) - robert, 2015-12-27, 16:25
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 11:24
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-27, 13:22
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 14:21
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-27, 14:27
- BD15 vs Altec 416A (8ohm) - Gasper, 2015-12-29, 10:42
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-29, 11:29
- BD15 vs Altec 416A (8ohm) - Gasper, 2015-12-29, 15:59
- BD15 vs Altec 416A (8ohm) - Don Reid, 2016-02-02, 20:15
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-29, 11:29
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 14:21
- BD15 vs Altec 416A (8ohm) - robert, 2015-12-27, 11:20
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-27, 10:11
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-23, 20:47
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-23, 17:48
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-18, 09:32
- BD15 vs Altec 416A (8ohm) - Chris Valder, 2015-12-18, 00:16
- BD15 vs Altec 416A (8ohm) - Bert, 2015-12-17, 20:00
- Problem with AER-MD3 - Don Reid, 2015-10-31, 17:11
- Problem with AER-MD3 - Bert, 2015-10-31, 18:36
- Problem with AER-MD3 - Don Reid, 2015-11-01, 01:51
- Problem with AER-MD3 - Bert, 2015-11-02, 12:02
- Problem with AER-MD3 - Don Reid, 2015-11-02, 19:17
- Problem with AER-MD3 - Bert, 2015-11-02, 20:17
- Problem with AER-MD3 - Don Reid, 2015-11-04, 01:47
- Problem with AER-MD3 - alwsjr, 2015-11-12, 15:10
- Problem with AER-MD3 - Don Reid, 2015-11-15, 23:59
- Problem with AER-MD3 - Bert, 2015-11-16, 20:32
- Problem with AER-MD3 - ThomasT, 2016-01-29, 18:38
- Problem with AER-MD3 - Bert, 2016-01-29, 19:06
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:47
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:50
- Problem with AER-MD3 - Bert, 2016-01-29, 20:29
- Problem with AER-MD3 - ThomasT, 2016-01-30, 07:30
- Problem with AER-MD3 - Bert, 2016-01-29, 20:29
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:50
- Problem with AER-MD3 - ThomasT, 2016-01-29, 19:47
- Problem with AER-MD3 - Bert, 2016-01-29, 19:06
- Problem with AER-MD3 - ThomasT, 2016-01-29, 18:38
- Problem with AER-MD3 - Bert, 2015-11-16, 20:32
- Problem with AER-MD3 - Don Reid, 2015-11-15, 23:59
- Problem with AER-MD3 - alwsjr, 2015-11-12, 15:10
- Problem with AER-MD3 - Don Reid, 2015-11-04, 01:47
- Problem with AER-MD3 - Bert, 2015-11-02, 20:17
- Problem with AER-MD3 - Don Reid, 2015-11-02, 19:17
- Problem with AER-MD3 - Bert, 2015-11-02, 12:02
- Problem with AER-MD3 - Don Reid, 2015-11-01, 01:51
- Problem with AER-MD3 - Bert, 2015-10-31, 18:36
- Flat paint for horns? - samoore, 2015-09-12, 22:43
- Flat paint for horns? - robert, 2015-09-13, 23:58
- Flat paint for horns? - Bert, 2015-09-14, 08:02
- Orphean rediscovered. - samoore, 2015-08-26, 07:17
- Orphean rediscovered. - Gasper, 2015-08-26, 09:56
- Orphean rediscovered. - samoore, 2015-08-26, 16:55
- Never change a winning team... - Bert, 2015-08-26, 10:03
- Orphean rediscovered. - avaarni, 2015-08-26, 10:52
- Orphean rediscovered. - Don Reid, 2015-08-27, 00:05
- Orphean rediscovered. - Don Reid, 2015-08-27, 00:16
- Orphean rediscovered. - Gasper, 2015-08-26, 09:56
- amps for the horns - robert, 2015-05-10, 11:16
- amps for the horns - Bert, 2015-05-10, 19:31
- amps for the horns - robert, 2015-05-10, 23:50
- Another vote for the 45 SET amps!.............nt - Kevin, 2015-05-10, 20:44
- amps for the horns - DeMarko, 2015-05-20, 23:31
- amps for the horns - Don Reid, 2015-05-31, 00:14
- amps for the horns - RobsterD, 2015-06-05, 22:09
- amps for the horns - diz1, 2015-06-12, 21:59
- amps for the horns - robert, 2015-06-14, 15:26
- amps for the horns - diz1, 2015-06-14, 23:59
- amps for the horns - robert, 2015-06-14, 15:26
- amps for the horns - robert, 2015-06-14, 15:22
- amps for the horns - diz1, 2015-06-12, 21:59
- Second the First Watt - samoore, 2015-08-26, 03:53
- Second the First Watt - robert, 2015-08-28, 10:37
- amps for the horns - RobsterD, 2015-06-05, 22:09
- amps for the horns - Don Reid, 2015-05-31, 00:14
- amps for the horns - Bert, 2015-05-10, 19:31
- V6 Xtreme has been changed to Sigma... - Bert, 2015-04-20, 13:55
- V6 Xtreme has been changed to Sigma... - robert, 2015-04-20, 19:39
- Exciting Times indeed, but Hopefully you........ - Kevin, 2015-04-20, 23:38
- Never change a winning team... ;-) - Bert, 2015-04-21, 09:30
- New speaker design... - Bert, 2015-04-01, 10:30
- It is a relative small design as well... - Bert, 2015-04-01, 11:16
- It is a relative small design as well... - Gasper, 2015-04-01, 13:29
- Yes indeed, 12" bass drivers are used... - Bert, 2015-04-01, 14:44
- It is a relative small design as well... - Gasper, 2015-04-01, 13:29
- Modern looks...? - Bert, 2015-04-01, 14:43
- Modern looks...? - teigetje, 2015-04-01, 21:54
- Modern looks...? - Bert, 2015-04-02, 08:36
- Modern looks...? - teigetje, 2015-04-01, 21:54
- New speaker design... - Kevin, 2015-04-04, 00:16
- No yoke... - Bert, 2015-04-05, 06:18
- New speaker design... - Kevin, 2015-04-04, 01:16
- Yes... - Bert, 2015-04-05, 06:19
- Yes... - Don Reid, 2015-04-07, 02:59
- 56 cm (22") in diameter.. (nt) - Bert, 2015-04-07, 10:12
- Yes... - Don Reid, 2015-04-07, 02:59
- Yes... - Bert, 2015-04-05, 06:19
- Work in progress... ;-) - Bert, 2015-04-17, 11:31
- Work in progress... ;-) - Gasper, 2015-04-17, 13:37
- It is a relative small design as well... - Bert, 2015-04-01, 11:16
- REF2010 DIY - Bert, 2015-01-18, 14:03
- REF2010 DIY - teigetje, 2015-01-18, 19:53
- Damping Materials - Bert, 2015-01-18, 20:49
- Can't find parts? - Bert, 2015-01-18, 20:55
- REF2010 DIY - Don Reid, 2015-01-19, 07:05
- REF2010 DIY - Bert, 2015-01-19, 08:51
- REF2010 DIY - Gasper, 2015-01-19, 17:53
- REF2010 DIY - werner, 2015-01-25, 11:58
- REF2010 DIY - Bert, 2015-01-25, 12:10
- REF2010 DIY - werner, 2015-01-25, 12:21
- Updated PDF - Bert, 2015-01-25, 13:38
- Updated PDF - werner, 2015-01-28, 15:02
- work in progress - werner, 2015-03-31, 15:00
- Nice going! - Bert, 2015-03-31, 20:31
- Nice going! - teigetje, 2015-03-31, 22:56
- Nice going! - Bert, 2015-03-31, 20:31
- work in progress - werner, 2015-03-31, 15:00
- Updated PDF - werner, 2015-01-28, 15:02
- Updated PDF - Bert, 2015-01-25, 13:38
- REF2010 DIY - werner, 2015-01-25, 12:21
- REF2010 DIY - Bert, 2015-01-25, 12:10
- REF2010 DIY - teigetje, 2015-01-18, 19:53
- New project... the V6 Xtreme - Bert, 2015-01-08, 20:50
- V12... - Gasper, 2015-01-09, 08:55
- New project... the V6 Xtreme - teigetje, 2015-01-09, 21:25
- New project... the V6 Xtreme - robert, 2015-01-10, 17:45
- Won't take long anymore... - Bert, 2015-03-27, 09:56
- Won't take long anymore... - teigetje, 2015-03-29, 21:57
- Convince your wife first...again! ;-) - Bert, 2015-03-30, 14:24
- Won't take long anymore... - teigetje, 2015-03-29, 21:57
- Avantgarde meets BD-Design ;-) - Bert, 2014-12-20, 16:51
- Avantgarde meets BD-Design ;-) - Gasper, 2014-12-22, 16:32
- Signal Earthing - Don Reid, 2014-09-09, 22:57
- Signal Earthing - Bert, 2014-09-10, 09:48
- speaker cable - robert, 2014-06-18, 00:58
- speaker cable - Bert, 2014-06-18, 09:19
- Copycats... - Bert, 2014-05-16, 16:29
- Copycats... - anubisgrau, 2014-05-16, 19:16
- Copycats... - Gasper, 2014-05-16, 20:02
- cheap horns - robert, 2014-05-16, 23:47
- cheap horns - Bert, 2014-05-27, 08:54
- Copycats... - Don Reid, 2014-05-26, 17:22
- cheap horns - robert, 2014-05-16, 23:47
- Copycats... - Ivo, 2014-07-15, 17:32
- A never ending story... - Bert, 2014-10-01, 09:38
- Stand built for my Orphean Horns - Kevin, 2014-04-12, 20:54
- Stand built for my Orphean Horns - joespride, 2014-04-12, 21:04
- Stand built for my Orphean Horns - Kevin, 2014-04-12, 21:07
- Nice one Kevin... - Bert, 2014-04-13, 08:39
- Nice one Kevin... - DeMarko, 2014-05-10, 17:06
- Stand built for my Orphean Horns - joespride, 2014-04-12, 21:04
- bass cabinet - joespride, 2014-04-12, 17:20
- You have mail... (nt) - Bert, 2014-04-12, 17:54
- You have mail... (nt) - joespride, 2014-04-13, 17:30
- You have mail... (nt) - Bert, 2014-04-12, 17:54
- Next Level Up? - Bert, 2014-04-03, 13:16
- Next Level Up? - Gasper, 2014-04-03, 14:33
- Next Level Up? - Bert, 2014-04-03, 14:37
- I think... - Bert, 2014-04-03, 19:05
- I think... - Rudolf150, 2014-04-04, 19:40
- I know... - Bert, 2014-04-05, 08:32
- I think... - Rudolf150, 2014-04-04, 19:40
- Next Level Up? - Gasper, 2014-04-05, 10:15
- Perhaps... - Bert, 2014-04-05, 11:58
- Perhaps... - Gasper, 2014-04-05, 12:11
- Perhaps... - Bert, 2014-04-05, 13:17
- Perhaps... - Gasper, 2014-04-05, 12:11
- Perhaps... - Bert, 2014-04-05, 11:58
- Size matters... - Bert, 2014-04-13, 10:24
- Picture of the "renewed" NoNonse Orelo M1... - Bert, 2014-05-27, 15:00
- Picture of the "renewed" NoNonse Orelo M1... - Gasper, 2014-05-28, 11:37
- Size DOES matter... - Bert, 2014-05-28, 13:10
- Size DOES matter... - Gasper, 2014-05-28, 13:26
- Size DOES matter... - Bert, 2014-05-28, 13:39
- Size DOES matter... - Gasper, 2014-05-28, 13:26
- Size DOES matter... - Bert, 2014-05-28, 13:10
- Picture of the "renewed" NoNonse Orelo M1... - Gasper, 2014-05-28, 11:37
- Picture of the "renewed" NoNonse Orelo M1... - Bert, 2014-05-27, 15:00
- Next Level Up? - Gasper, 2014-04-03, 14:33
- Orphean Horn Pictures of my System..... - Kevin, 2014-03-24, 23:55
- Orphean Horn Pictures of my System..... - Bert, 2014-03-25, 09:10
- Orphean Horn Pictures of my System..... - Don Reid, 2014-04-09, 23:13
- Orphean Horn Pictures of my System..... - Kevin, 2014-04-09, 23:17
- Orphean Horn Pictures of my System..... - Don Reid, 2014-04-09, 23:13
- Orphean Horn Pictures of my System..... - joespride, 2014-04-12, 17:23
- Orphean Horn Pictures of my System..... - Bert, 2014-03-25, 09:10
- Orphean Horns Back from the Painter - Kevin, 2014-03-20, 23:32
- Orphean Horns Back from the Painter - Bert, 2014-03-21, 08:53
- Crossover Schematic - Kevin, 2014-03-19, 20:21
- Crossover Schematic - Bert, 2014-03-19, 20:43
- A much better way to hook up the Hypex Amps with a Tube Amp - Kevin, 2014-03-13, 22:05
- It depends highly on the given situation... - Bert, 2014-03-14, 08:57
- It depends highly on the given situation... - Kevin, 2014-04-04, 01:13
- 100kohm (buffered)... - Bert, 2014-04-04, 08:44
- It depends highly on the given situation... - Kevin, 2014-04-04, 01:13
- It depends highly on the given situation... - Bert, 2014-03-14, 08:57
- Got my Orphean Horns........... - Kevin, 2014-03-08, 02:20
- Got my Orphean Horns........... - Bert, 2014-03-08, 08:22
- Got my Orphean Horns........... - Kevin, 2014-03-09, 13:46
- Got my Orphean Horns........... - Bert, 2014-03-09, 14:01
- Got my Orphean Horns........... - DeMarko, 2014-03-20, 02:09
- Got my Orphean Horns........... - Bert, 2014-03-20, 08:30
- Got my Orphean Horns........... - DeMarko, 2014-03-20, 02:09
- Got my Orphean Horns........... - fu_man, 2014-03-10, 09:52
- Got my Orphean Horns........... - Bert, 2014-03-09, 14:01
- Got my Orphean Horns........... - Kevin, 2014-03-09, 13:46
- Got my Orphean Horns........... - Bert, 2014-03-08, 08:22
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-02-27, 17:03
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-02-27, 17:21
- AER MD1 phisical dimension? - Bert, 2014-02-27, 19:53
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-02-28, 05:06
- AER MD1 phisical dimension? - Bert, 2014-02-28, 09:02
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-03-01, 03:10
- AER MD1 phisical dimension? - Bert, 2014-03-01, 08:33
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-03-01, 03:10
- AER MD1 phisical dimension? - Bert, 2014-02-28, 09:02
- AER MD1 phisical dimension? - Kohjin Yamada, 2014-02-28, 05:06
- 'Is there anybody in there??' - gary, 2014-02-13, 20:13
- 'Is there anybody in there??' - Bert, 2014-02-13, 20:35
- 'Is there anybody in there??' - robert, 2014-02-16, 11:27
- 'Is there anybody in there??' - Don Reid, 2014-02-23, 06:17
- 'Is there anybody in there??' - Bert, 2014-02-23, 08:42
- 'Is there anybody in there??' - Gasper, 2014-02-23, 11:13
- 'Is there anybody in there??' - robert, 2014-02-24, 17:46
- 'Is there anybody in there??' - Gasper, 2014-02-23, 11:13
- 'Is there anybody in there??' - Bert, 2014-02-23, 08:42
- 'Is there anybody in there??' - Don Reid, 2014-02-23, 06:17
- Best Guess on Orphean MKIII Availability.............. - Kevin, 2013-12-03, 00:23
- Best Guess on Orphean MKIII Availability.............. - Bert, 2013-12-03, 07:12
- Best Guess on Orphean MKIII Availability.............. - robert, 2013-12-04, 11:00
- Best Guess on Orphean MKIII Availability.............. - Bert, 2013-12-03, 07:12
- forum layout - teigetje, 2013-11-14, 19:05
- forum layout - Bert, 2013-11-14, 19:32
- Further Update... - Bert, 2013-11-16, 13:55
- Further Update... - teigetje, 2013-11-17, 10:30
- Done! (nt) - Bert, 2013-11-20, 08:01
- Done! (nt) - Gasper, 2013-11-21, 08:01
- Further Update... - Daze, 2013-11-21, 02:43
- Further Update... - Bert, 2013-11-21, 10:54
- Further Update... - Gasper, 2013-11-21, 17:11
- Further Update... - Gasper, 2013-11-21, 17:14
- Further Update... - Bert, 2013-11-21, 17:58
- Further Update... - Gasper, 2013-11-21, 19:24
- Further Update... - Gasper, 2013-11-22, 09:24
- Further Update... - Gasper, 2013-11-21, 19:24
- Further Update... - Bert, 2013-11-21, 17:58
- Further Update... - Gasper, 2013-11-21, 17:14
- Further Update... - Daze, 2013-11-24, 04:41
- Further Update... - Bert, 2013-11-24, 07:18
- Reduced brightness - Bert, 2013-12-10, 09:08
- Reduced brightness - Daze, 2014-01-16, 02:41
- Further Update... - Daze, 2014-01-16, 02:51
- Reduced brightness - Bert, 2013-12-10, 09:08
- Further Update... - Bert, 2013-11-24, 07:18
- Further Update... - Gasper, 2013-11-21, 17:11
- Further Update... - Bert, 2013-11-21, 10:54
- Further Update... - Bert, 2013-11-16, 13:55
- forum layout - Bert, 2013-11-14, 19:32
- Hypex Crossover Question on Slope - Kevin, 2013-11-13, 21:17
- Hypex Crossover Question on Slope - Bert, 2013-11-13, 21:51
- Thanks!.....Now we are getting somewhere!...........nt - Kevin, 2013-11-14, 00:00
- Finally! ;-) - Bert, 2013-11-14, 09:38
- Thanks!.....Now we are getting somewhere!...........nt - Kevin, 2013-11-14, 00:00
- Hypex Crossover Question on Slope - Bert, 2013-11-13, 21:51
- Hypex PSC2.400 software education - mflaten, 2013-11-13, 02:39
- Hypex PSC2.400 software education - Bert, 2013-11-13, 08:19
- Good Luck Mark! - Kevin, 2013-11-13, 13:05
- Got the Hum out of my System....Hypex Amps are working Great - Kevin, 2013-11-11, 01:28
- Got the Hum out of my System....Hypex Amps are working Great - Bert, 2013-11-11, 10:27
- Got the Hum out of my System....Hypex Amps are working Great - Kevin, 2013-11-11, 13:10
- Got the Hum out of my System....Hypex Amps are working Great - Bert, 2013-11-11, 10:27