Physical Measurements of Orphean Tube? (Orphean)

by Kevin @, Minneapolis, Wednesday, December 04, 2013, 15:22 (1509 days ago)

Since I am ordering the Orphean Horns, I will start building some stands to support them. In light of this, I would like to know the Diameter and Length of the Tube that fits onto the Orphean Horn.

Avatar

160mm...

by Bert @, Wednesday, December 04, 2013, 15:26 (1509 days ago) @ Kevin

...and 250mm length to support.

Make the stands curve 161-162mm in diameter and have the Orphean horns laying on top of some soft rubber foam.

Bert

--
BD-Design - Only the Best!

160mm...

by Kevin @, Minneapolis, Thursday, December 05, 2013, 19:27 (1508 days ago) @ Bert
edited by Kevin, Thursday, December 05, 2013, 19:34

Something is not adding up to me. In an earlier thread you had indicated that the Total Length of the Orphean Horn with Compression Driver was 61,3 cm.

Here http://forum.bd-design.nl/index.php?id=17337

If the Orphhean Horn is 50 cm Long and the Tube is 250mm that alone would make the horn 75 cm without the Compression Driver. I hope this is not the case as The Horn would have a very difficult time fitting into my Corner space.

Maybe the 50cm length for the Horn Includes the 25 cm for the Tube? - I hope that is the case.

Avatar

160mm...

by Bert @, Thursday, December 05, 2013, 20:42 (1508 days ago) @ Kevin

http://forum.bd-design.nl/index.php?id=17337

Things change... ;-)

If the Orphean Horn is 50 cm Long and the Tube is 250mm that alone would make the horn 75 cm without the Compression Driver. I hope this is not the case as The Horn would have a very difficult time fitting into my Corner space.

No worries, the total length remains the same as indicated before. The horn is still the same horn. The only thing changed is the rear tube which is smaller in diameter, it looks better now and comes in one piece as a bonus.

Bert

--
BD-Design - Only the Best!

160mm...

by Kevin @, Minneapolis, Friday, December 06, 2013, 14:57 (1507 days ago) @ Bert

Could you please post a picture of the new Horn?

Avatar

160mm...

by Bert @, Friday, December 06, 2013, 15:54 (1507 days ago) @ Kevin

http://forum.bd-design.nl/index.php?id=17286

--
BD-Design - Only the Best!

RSS Feed of thread