Philips 9710M in Singular (BD-Design)
Hi,
Last week somebody from Australia suggested me to build the Singular enclosures for my NOS Philips 9710M. When searched the Internet for the Singular enclosere I also found an article in this forum mentioning the 9710: http://www.bd-design.info/forum/reply.php?id=7746,7801
Bert suggested in the acticle: The 9710 might need some special tuning of the enclosure, perhaps you can bring it with you to see how it reacts in the Singular first?
What was the reaction of the 9710 in the Signular? Does it need special tuning?
I also have a pair of old Richard Allan CG8T drivers. I was wondering if these also could be used with the Singular enclosure. I have included the specs.
Thanks,
Patrick Nagtzaam
Brand = Richard Allan
Type = 8CGT
Manufactured = April 20, 1971
Impedance = 8/15 Ohm
fs = 70Hz
Qms = 7.03
Qes = 0.7
Sd = 31.416 cm
Qts = 0.637
Vas = 38.80 liter = 1.37 cu. ft.
SPL = 94.58 dB
Freq = 55-17 kHZ
Baffle hole = 17.8 cm
Cone diameter = 19 cm
Voice Coil diameter = 2.54 cm
Width = 20.3
Height = 9.2cm,
Weight= 1.8 kg
Rated input = 6 Watt
Max power = 12 Watt
No = 1.80 %
Cms = 8.90 M/N
Mms = 5.80 gms
Bl = 5.05 w b/M
Density = 14,000
Gauss = 56,000