DeoxIT and SilClear contact enhancer (Tweaks)

by Bert @, Sunday, February 08, 2009, 12:55 (5564 days ago)

Clean contacts, the best and cheapest tweak

[image]
Dirty, corroded or oxidized contacts will bring you blurred sound and vision. When the years pass by, the contacts of your interlinks and apparatus will become more and more dirty, partially because oxygen in the air and the sweat from your fingers will have a chemical reaction with the metal parts of your connectors. This so-called oxidation causes high and non-linear resistances. This resistance will be especially high for small signals, thus preventing the crisp reproduction of tiny details

Use DeoxIT on all interlink-connectors, mains plugs, fuses, speaker cables, switches, relays and all other contacts to ensure they are all fully clean. DeoxIT works, where other contact cleaners fail. The use of it is as simple as applying a small amount of DeoxIT, wait two minutes and wipe off the excess. Clean contacts will be the result.

To permanently prevent new oxidation, we urge you to try SilClear. It will create resistances far lower than those of just cleaned, brand new contacts and new oxidation will have no chance, because all gaps will be filled with the special grease, in which the silver platelets are. Connectors treated with SilClear will be maintenance free for the next years to come.
[image]
Both products are available through my website if you're interested enough to try... :wink:

Here is a direct link: Other Goodies Page

Bert

--
BD-Design - Only the Best!

Tags:
Clean Contacts


Complete thread:

 RSS Feed of thread