DeoxIT and SilClear contact enhancer (Tweaks)
Clean contacts, the best and cheapest tweak
- Chemical, quick and thorough cleaning formula kills oxidation as well as corrosion
- Works perfectly on all connectors, new as well as used
- Leaves a microscopic thin layer of protection
- Lowers noise floor and distortion, by providing a low and constant resistance
- Improves clarity, definition and dynamics
- Brings the very best out of each audio-/video system
- One 7,4 ml bottle will last very long
- Very easy to apply by using the brush in the cap of the bottle
Dirty, corroded or oxidized contacts will bring you blurred sound and vision. When the years pass by, the contacts of your interlinks and apparatus will become more and more dirty, partially because oxygen in the air and the sweat from your fingers will have a chemical reaction with the metal parts of your connectors. This so-called oxidation causes high and non-linear resistances. This resistance will be especially high for small signals, thus preventing the crisp reproduction of tiny details
Use DeoxIT on all interlink-connectors, mains plugs, fuses, speaker cables, switches, relays and all other contacts to ensure they are all fully clean. DeoxIT works, where other contact cleaners fail. The use of it is as simple as applying a small amount of DeoxIT, wait two minutes and wipe off the excess. Clean contacts will be the result.
To permanently prevent new oxidation, we urge you to try SilClear. It will create resistances far lower than those of just cleaned, brand new contacts and new oxidation will have no chance, because all gaps will be filled with the special grease, in which the silver platelets are. Connectors treated with SilClear will be maintenance free for the next years to come.
Both products are available through my website if you're interested enough to try... :wink:
Here is a direct link: Other Goodies Page
Bert
--
BD-Design - Only the Best!